3-Tier Weight Tree & Bar Stand
£114.99
Bars & Clips
The cheapest piece of safety equipment in any gym, and the one most often skipped. Spring collars clamp onto a 50mm Olympic sleeve in a second, holding plates in place so a slightly uneven press does not send weight sliding off one end of the bar.
Spring collars are the fastest collars to use, which is precisely why they get used. A quick-release lever collar is more secure, but if changing it takes ten seconds per side, people skip it during warm-ups, and warm-ups are exactly when uneven loading tends to happen. A collar you will actually fit on every set is worth more than a better collar you leave on the floor.
Their limitation is grip force under dynamic loading. Spring collars hold well for controlled work but can creep slightly under repeated impact, so for Olympic lifting or anything where the bar is dropped, a lever or locking collar is the better choice. For squats, presses, rows and deadlifts performed under control, spring collars are entirely adequate.
Fit collars for every set involving a loaded bar, without exception. The risk is highest on unilateral or slightly asymmetric movements: single-arm work, uneven bench press, overhead press with a drifting bar and bent-over rows. A plate sliding off one sleeve mid-rep instantly transfers the entire remaining load to the other side, which is how bar-related injuries usually happen.
Choose spring collars for speed and everyday use. Choose quick-release lever collars where maximum clamping force matters, particularly for heavy or dynamic lifting. Most home gyms benefit from owning both: springs for warm-ups and accessory work, lever collars for heavy working sets. Note that these fit 50mm Olympic sleeves only, not standard one-inch bars.
Will these fit a standard one-inch bar?
No. They are sized for Olympic 50mm sleeves. Standard spinlock bars use threaded collars instead.
Are spring collars secure enough for heavy squats?
For controlled squats, yes. For dropping the bar or Olympic lifting, a quick-release lever collar provides more clamping force.
How many do I need?
Two, one per sleeve. They are supplied as a pair.
Do they scratch the barbell?
The coating limits marking, but any collar clamping onto a sleeve will show some wear over time. This is normal and does not affect function.
Overall Size: 18 cm length × 11 cm width × 5 cm depth
Height: 2 cm
Display Dimensions: 18 cm long × 11 cm wide
Material: Chrome-plated high-tensile steel
Overall Size: 18 cm length × 11 cm width × 5 cm depth
Height: 2 cm
Display Dimensions: 18 cm long × 11 cm wide
Material: Chrome-plated high-tensile steel
Delivery, returns and warranty are answered in full on the delivery page, in the Help centre and on the warranty page.
| Category | Bars and collars |
|---|---|
| Term | Statutory rights apply; manufacturer terms confirmed on request |
| Covers | Bars that bend beyond their stated tolerance, sleeves that seize, knurling or chrome that fails without impact, collar springs and locks. This guarantee is given by LIFT SETS LTD, Unit at St. Helens, Merseyside, and does not affect your statutory rights under the Consumer Rights Act 2015. |
| Not covered | Bars dropped on safeties or the floor with plates loaded, damage from mismatched sleeves, cosmetic marks. Exclusions never remove your statutory rights: a fault that was present at delivery is covered whatever the exclusions say. |
| How to claim | Email support@liftsets.co.uk with your order number, a description of the fault and two or three photos or a short video. We reply with the next step: replacement part, repair, replacement or refund. Damage or shortages on arrival are a delivery claim, not a warranty claim: tell us as soon as you can. |
Your statutory rights under the Consumer Rights Act 2015 apply in full: up to 30 days to reject a faulty item for a refund, then repair or replacement, and for six months a fault is presumed to have been present at delivery. Full details: Warranty.
£114.99
From £7.99
From £10.99
