Standard Plate Storage Rack

Free delivery to every address in Great Britain.

Storage Racks

Horizontal plate racks load from the side rather than the top, which means you slide a 25kg plate on instead of lifting it over a post. For anyone loading heavy plates alone, that difference is worth more than it sounds.

KEY FEATURES

Horizontal posts allow plates to be slid rather than lifted over
Integrated barbell storage keeps bars upright and protected
Holds Olympic and standard plates in matched pairs and weight order
Low profile fits neatly beside a rack or against a wall
Powder-coated steel frame with a stable base
Reduces the awkward lifting involved in plate changes

PRODUCT OVERVIEW

The mechanical advantage of horizontal loading is real. A vertical weight tree requires you to lift each plate above the top of its post and lower it on, which for a 25kg plate means a controlled overhead-ish movement performed repeatedly between sets. A horizontal rack lets the plate be carried at waist height and slid straight on, which is both easier and considerably safer.

The trade-off is footprint. Horizontal racks are wider and lower than trees, so they use more wall length and less height. In a garage with limited wall space but decent ceiling height, a tree may still be the better choice. In a low-ceilinged room, a horizontal rack is usually the more practical option.

TRAINING APPLICATION

This shows its value in any session with heavy loading and unloading: working up to a heavy squat single, running down through drop sets, or stripping a deadlift bar at the end of a session. Reducing the effort of each plate change genuinely preserves energy for the training itself, which is not a trivial consideration late in a heavy session.

HOW TO CHOOSE?

Choose a horizontal rack if you handle cast iron plates alone, have limited ceiling height, or find lifting plates over a tree post awkward. Choose a vertical weight tree if wall space is scarce. If you own a large bumper plate collection, the extended horizontal rack is designed for that bulk specifically.

FAQs

How is this different from a weight tree?

Plates slide on horizontally rather than being lifted over a vertical post, which is easier and safer with heavy plates. It uses more wall width and less height.

Does it store barbells too?

Yes, integrated holders keep bars upright, protecting the knurling and sleeves and freeing up floor space.

What plate sizes does it take?

Olympic and standard plates. Plates stand in 10 cm slots rather than sliding onto a post, so the bore makes no difference. Check the total thickness of the plates you intend to store against the 10 cm slot width.

Is it stable on a concrete floor?

Yes. Load evenly across the posts and keep the heaviest plates innermost for best stability.

Specifications

Height: 27.5 cm (about 11 inches)
Width: 109.5 cm (about 43 inches)
Depth: 34 cm (about 13.5 inches)
Plate slot width: 10 cm (about 4 inches)

Feature highlights

Unique Selling Proposition
Unlike traditional vertical weight trees, this horizontal bumper plate storage rack provides improved accessibility and balanced weight distribution. The integrated barbell holders create a complete plate rack & bar stand solution, reducing clutter and elevating overall gym organisation.

Versatility & Compatibility
Designed for compatibility with bumper plates, cast iron plates, and Olympic barbells, this plate rack integrates seamlessly beside squat racks, benches, and power cages. Its compact footprint maximises floor efficiency while maintaining generous storage capacity.

Design & Aesthetic
Finished in a refined matte black powder coat, this horizontal weight plate rack delivers a clean, structured look to any training space. Its low-profile, elongated frame keeps plates neatly aligned while enhancing the professional feel of your home gym or commercial strength setup.

Functionality & Practical Uses
The horizontal plate storage holder features multi-level plate slots for organised separation of Olympic and standard plates. A designated fractional weight section allows precise weight progression, keeping change plates easily accessible during strength training, powerlifting, or functional fitness workouts.

Materials & Construction
Manufactured from heavy-duty steel with reinforced welds, this strength fitness rack is built for long-term durability and high weight plate capacity. The stable base design ensures secure support under load, while the scratch-resistant coating protects against daily wear from bumper and iron plates.

Questions & answers

What are the dimensions of the Standard Weight Plate Storage Rack?

The Standard Weight Plate Storage Rack is 109.5cm wide, 34cm deep and 27.5cm high, with 10cm-wide plate slots. It weighs about 15kg, and the price is shown on this page.

Which plates fit the Standard Weight Plate Storage Rack?

The Standard Weight Plate Storage Rack takes Olympic and standard plates, including cast iron, tri-grip and bumper plates, in multi-level slots with a separate fractional section for 1.25kg and 2.5kg change plates. Plates slide in sideways rather than lifting over a post.

How many plates fit in each slot of the Standard Weight Plate Storage Rack?

Each slot on the Standard Weight Plate Storage Rack is 10cm wide. That holds two 20kg Cast Iron Weight Plates (33.6mm each), one 20kg Tri-Grip plate (58mm) or one 20kg bumper (72mm), so cast iron makes the best use of the rack.

Does the Standard Weight Plate Storage Rack store barbells?

Yes. The Standard Weight Plate Storage Rack has integrated barbell holders that keep bars upright, protecting the knurling and sleeves and getting them off the floor.

Should I choose the Standard or the Extended Weight Plate Storage Rack?

The Standard Weight Plate Storage Rack, at 109.5cm, suits a moderate cast iron or tri-grip collection beside a rack. The Extended Weight Plate Storage Rack, at 141cm, adds length and wheels, which suits a bulky bumper plate set or a shared space. Each rack shows its current price on its own page.

How is the Standard Weight Plate Storage Rack delivered?

The Standard Weight Plate Storage Rack ships free anywhere in Great Britain, including the Scottish Highlands and Islands; Northern Ireland is priced by weight at checkout. Order by 2pm Monday to Friday for same-working-day dispatch; standard delivery takes 2 to 5 working days after dispatch, and express (Great Britain only where available, priced by order weight and shown at checkout) takes 1 to 2 working days.

What are the returns and warranty terms for the Standard Weight Plate Storage Rack?

You have 180 days to return the Standard Weight Plate Storage Rack. You pay return postage unless it is faulty; if it is faulty or incorrect the return is free. Cover is your statutory consumer rights rather than a separate manufacturer's warranty. Prices include VAT. Klarna is offered at checkout on eligible orders; trade quotes on request.

Delivery, returns and warranty are answered in full on the delivery page, in the Help centre and on the warranty page.

Warranty

Category	Racks, benches and storage
Term	Statutory rights apply; manufacturer terms confirmed on request
Covers	Frame welds and structural steel, adjustment pins and catches, upholstery seams and feet under normal use within any load rating stated on the product page. This guarantee is given by LIFT SETS LTD, Unit at St. Helens, Merseyside, and does not affect your statutory rights under the Consumer Rights Act 2015.
Not covered	Use above any load rating stated on the product page, torn upholstery from sharp objects, damage from moving assembled units, rust from outdoor or wet storage. Exclusions never remove your statutory rights: a fault that was present at delivery is covered whatever the exclusions say.
How to claim	Email support@liftsets.co.uk with your order number, a description of the fault and two or three photos or a short video. We reply with the next step: replacement part, repair, replacement or refund. Damage or shortages on arrival are a delivery claim, not a warranty claim: tell us as soon as you can.

Your statutory rights under the Consumer Rights Act 2015 apply in full: up to 30 days to reject a faulty item for a refund, then repair or replacement, and for six months a fault is presumed to have been present at delivery. Full details: Warranty.

Delivery & shipping

Free delivery to every address in Great Britain, including the Scottish Highlands and Islands. Northern Ireland is priced by weight at checkout. · 2–5 working days
Order before 2pm for same-working-day dispatch (Mon–Fri)
180-day returns · no restocking fee · you pay return postage unless faulty

Delivery policy · Returns policy · Warranty